Miele Dishwasher Connect & Commission (Each)

All connections to the mains electricity supply, either 230 volt or 415 volt,
will be made with IP44 'commando type plug and socket' (see note 1). All hot
and cold water connections are to have control valves with 3/4"" BSP male
fittings and be within one metre. The deionised water connection is adjacent
to the machine within 1.5 metres. The new machine is unboxed and placed in the
vicinity of the final position.

**Notes:** 1. If replacing an existing appliance that has been hard wired it
is acceptable (as long as the old lead is of good order) for it to be cut and
an IP44 socket to be fitted in line. 2. For DWH 020 012 just a 13 amp socket
is required. **NB:** If the machine has been connected electrically and
plumbed in by the customer then commissioning by an engineer is included in
the price of the machine.

**Installation, Commissioning and Plinth** All information as above, but in
addition, for 900mm machines to be installed on a plinth assistance would be
required as this is a two person operation. If assistance cannot be offered to
install a 900mm plinth an extra charge will be levied for a Miele technician
to attend.